====== Error Element ======

==== Description ====
The error element triggers faults in the simulated CAMS. Only one fault at a time can be active in the system. If faults overlap the system will postpone the upcoming fault until the current one is corrected or cleared.

==== Parameters ====
  * **Start time**: defines the time in //hour:minute:seconds// within the simulation when the fault will occur. If another fault is still ongoing,  the start time will be automatically postponed.
  * **Error type**: defines the type of fault that will happen in the system, according to [[simulated_faults|the following list]]
  * **Diagnostics**: this option is used to set the type of diagnostic that will be provided by AFIRA. If the value is set to **true** the diagnostic provided will match the **Error type** (ie. the hints provided by the automation will be correct); if the diagnostics is set to **miss** no diagnostic will be provided (the automation will not notify the error). It is also possible to simulate a //fallible automation// by choosing a different fault.
  * **Fake level**: if **Diagnostics** is set to **true**, automation can be made to wrongly detect a non-existing fault. Fake level **0** means that the diagnostic is accurate, level **1** will trigger the master alarm but provide no assistance, level **2** will show assistance without triggering the master alarm, whereas level **3** will trigger both assistance and the master alarm. Any level different from **0** will make the fault a fake one, meaning that devices (apart from the master alarm and or assistance) will continue to operate correctly.
  * **Clear after** (seconds; default -1): a value different from **-1** indicates the delay (in seconds) after which an undiagnosed / unrepaired fault will be cleared automatically.
  * **Allow late repair**: if enabled, the error will not be cleared if the correct repair is in progress.
  * **Notify after**: notifies the operator after the selected delay (in seconds) if the error has not been   repaired (**-1** will disable notification).
  * **Efficiency**: for **_ineff** errors this settings determines the efficiency level.
  * **Survey (correct repair)**: allows for selecting survey questions that are displayed after the error is correctly repaired by the user.
  * **Survey (missed repair)**: allows for selecting survey questions that are displayed if the error is undiagnosed or incorrectly repaired by the operator.
  * **Survey delay**: time (in seconds) before showing the survey (applies after the correct repair operation or when the error is cleared).
  * **Assistance after repair**: allows for selecting the assistance level to be used after repair.
  * **Assistance delay**: delay (in seconds) before changing the assistance level.