TeamCAMS

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Script Element ======

==== Description ====
The **script** element is used to configure the basic parameters of an experiment. A **script** element is automatically added to each script as soon as the script is saved: the script 
element will be shown upon reloading the script. This element is also used to enable and configure **adaptive automation**. The script element has no time attribute associated.

==== Parameters ====

  * **Adaptive control** (text, default: False): enabling adaptive control will turn on data logging to support adaptive control of the level of automation.
  * **Adaptive control type** (text, default: none): when adaptive control is enabled, this option allows for selecting the adaptive control type during the experiment:
    * **none**: no adaptive control will be performed;
    * **transmission**: perform adaptive control based on the transmission check delay (secondary task);
    * **logging**: perform adaptive control based on the N2 logging delay (secondary task);
    * **combined**: perform adaptive control based on both transmission check delay and N2 logging delay;
    * **predefinedtransmission**: perform adaptive control based on the transmission check delay (secondary task) using predefined intervals;
    * **predefinedlogging**: perform adaptive control based on the N2 logging delay (secondary task) using predefined intervals;
  * **Adaptive maximum LOA change** (text, default: 0): sets the maximum number of levels for increasing and decreasing the Level Of Automation when performing adaptive control (for example, a value of 1 means that adaptive control can only increase or decrease the LOA by one level)
  * **Transmission time baseline** (text, default: 0): default threshold value for adaptive control based on the transmission check delay (used when adaptive control is set to **transmission** or **combined** and no faults are ongoing in the system)
  * **Transmission time baseline (fault) ** (integer, default: 0): default threshold value for adaptive control based on the transmission check delay (used when adaptive control is set to **transmission** or **combined** and a fault is ongoing in the system)
    * **Transmission time intervals** (text, default: 0): these intervals are used when the adaptive control type is set to **predefinedtransmission**. The level of automation is changed depending on the standard deviation of the sampled data (transmission check delays, in //ms//). More specifically, if the standard deviation is:
      * between A and B, the system switches to LOA1
      * between B and C, the system switches to LOA2
      * between C and D, the system switches to LOA3
      * between D and E, the system switches to LOA4
      * greater than E, the system switches to LOA5
  * **Logging time baseline** (text, default: 0): default threshold value for adaptive control based on the N2 logging delay (used when adaptive control is set to **logging** or **combined** and no faults are ongoing in the system)
  * **Logging time baseline (fault) ** (integer, default: 0): default threshold value for adaptive control based on the N2 logging delay (used when adaptive control is set to **logging** or **combined** and a fault is ongoing in the system)
    * **Logging time intervals** (text, default: 0): these intervals are used when the adaptive control type is set to **predefinedlogging**. The level of automation is changed depending on the standard deviation of the sampled data (N2 logging delays, in //ms//). More specifically, if the standard deviation is:
      * between A and B, the system switches to LOA1
      * between B and C, the system switches to LOA2
      * between C and D, the system switches to LOA3
      * between D and E, the system switches to LOA4
      * greater than E, the system switches to LOA5 


==== Sample XML ====

''<script adaptive="true" adaptiveControl="transmission" adaptiveControlMaxChange="0" reactionbaselinelogging="0" reactionbaselineloggingduringfault="0" reactionbaselinetransmission="0" reactionbaselinetransmissionDuringFault="0" reactiontimeloggingpredefinedintervals_a="0" reactiontimeloggingpredefinedintervals_b="0" reactiontimeloggingpredefinedintervals_c="0" reactiontimeloggingpredefinedintervals_d="0" reactiontimeloggingpredefinedintervals_e="0" reactiontimetransmissionpredefinedintervals_a="0" reactiontimetransmissionpredefinedintervals_b="0" reactiontimetransmissionpredefinedintervals_c="0" reactiontimetransmissionpredefinedintervals_d="0" reactiontimetransmissionpredefinedintervals_e="0">
    <adaptive start="0"/>
</script>
''
TeamCAMS

Page Tools
